SX2210 .8W Wire Wound High Precision Axial Resistor

Detailed Images
Details and Order Info
Electrical & Physical Specs
Attributes & Derating Table

Click the arrows for more detailed images:

MIN. RESISTANCE VS. TOLERANCE

DE-RATING CURVE

CAN'T FIND THE PART TO MATCH YOUR SPECS?

Then let PRC custom manufacture your wire wound resistor, sensor, or shunt with some of the shortest lead times in the industry. Engineering samples can be supplied at no cost to you in 7-10 days for most jobs. Computer tracking charts are available for reference with certain part types. If you need a specific marking on your part(s) we will custom print your order with the marking you desire & at no additional cost to you. If needed, you can interchange the size, shape, lead dimension, wattage, voltage, current, Ω value, tolerance, & TCR characteristics with most part types. Visit our High Precision SX Series & see if one of our other parts from the same series will satisfy all your requirements. If you still do not find a part that meets the exact specifications your application requires, simply follow the link Contact/Request For Quote & fill in all known spec fields. One of our highly trained engineers will review your objectives and see if we can modify one of our standard parts to satisfy all your requirements. If you are unsure how to accurately complete this form, give us a call & someone from our sales department will be more than happy to assist you.

ORDERING PROCEDURE

Our sales department is available to provide price, delivery, lead time & all other pertinent ordering instructions to companies within the U.S.A. If you wish to place an order in the United States, simply give us a call & ask for the Sales Department, our contact information is at the very top of every page. For companies outside the U.S.A., we have sales representatives in over 30 different countries to assist you. Click the link International Sales Representative Map to locate the sales representative nearest to your region & view their contact information. Our international sales representatives are readily available & eager to answer all inquiries regarding pricing, lead time, & ordering instructions as well as any other questions you may have.

Electrical & Physical Specifications:

A-Length:	19.56mm (.770")
B-Diameter:	6.10mm (.240")
Lead Dimensions:	.032" dia. X 1.500" long
Max Watts @ 1% Tol:	.8
Max Volts @ 1% Tol:	800
Temperature Range:	-55°C. to +125°C
Resistance (Ω):	.1 Min to 1.1MEG Max

SX Series Engineering Attributes:

RESISTANCE & TOLERANCES: You can select any Ohmic value or decimal part of an Ohm from .01Ω to 6MΩ (MegaOhm or MEG) with tolerances to ±.05%. For closer resistance tolerances refer to the Ultra Precision HR Series
TCR CHARACTERISTIC: Standard:0±10ppm/°C. for 100Ω & higher.; Standard: 0±15ppm/°C. for values below 100Ω; *TCR is calculated between +25°C. & +100°C.; -For lower specific TCRs to ±1ppm/°C., please refer to the Ultra Precision HR Series to satisfy your specifications.; -For higher specific TCRs to ±6000ppm/°C., please refer to the Compensator Series to satisfy your specifications.
POWER VS. AMBIENT TEMPERATURE: All SX High Precision Resistors are designed for full load based upon ±1% resistance tolerance providing the ambient temp (+) the rise in temp. due to self-heating, does not exceed +125°C. Derated to zero power @ +125°C. Refer to Derating Table shown below.
STABILITY VS. TIME: To ±.005%/yr. @ 25°C. with no Load.
REDUCTION OF THERMAL EMF USING COPPER TERMINALS:: Less than ±3 microvolts/°C. emitted.
PROTECTIVE COATING SEAL: Stress free solvent resistant silicone/epoxy seal.
MARKING (Identification): PRC stamp, part type & name, Ω value & tolerance, physical size permitting.
INDUCTANCE: Standard SX series resistors are inductively wound. Non-inductive windings are available, simply add suffix letter "N" in the part name.

*Please specify the ambient temperature span of your operation when placing your order.

Type SX Derating Table:*

For ±1% resistance tolerance apply up to 100% of rated power to +125°C. derated to zero power at 145°C.

For ±Ω% (0.5%) resistance tolerance apply up to 75% of rated power to +125°C. derated to zero power at 140°C.

For ±_% (0.25%) resistance tolerance apply up to 50% of rated power to +125°C. derated to zero power at 135°C.

For ±1/10% (0.1%) resistance tolerance apply up to 50% of rated power to +125°C. derated to zero power at 135°C.

For ±1/20% (0.05%) resistance tolerance apply up to 35% of rated power to +125°C.derated to zero power at 132°C.

Top

SX2210 .8W Wire Wound High Precision Axial Resistor

Technical Information

Detailed Images

Details and Order Info

Electrical & Physical Specs

Attributes & Derating Table

Click the arrows for more detailed images:

CAN'T FIND THE PART TO MATCH YOUR SPECS?

ORDERING PROCEDURE

Electrical & Physical Specifications:

SX Series Engineering Attributes: