Electrical & Physical Specifications:

Engineering Attributes:

RESISTANCES & TOLERANCES

You can select any value from 50Ω to 5KΩ @ 0°C. in tolerances from ± 0.03% (1/4 Din) to ± 0.24% (DIN x 2)

TCR CHARACTERISTICS AVAILABLE:

From +3000ppm/°C. to +4000ppm/°C. (between 0°C. and +100°C.) in 50ppm steps with the same linear tracking characteristics as the PRC100 Std. Ref. Series

STABILITY OF CALIBRATION

All PRC100 Sensors are closely matched & repeatable part-to-part. They have the ability to reproduce output readings consistently at the same temperature reference points under the same conditions & in the same direction.

STABILITY VS. TIME

The change in the original resistance (Ro) @ 0°C. is less than ±.1°C. or ±.038% after 10 cycles from 0°C. to +150°C..

SHELF LIFE

Shelf life stability is ±0.002%/year @ 25°C. with no load.

POWER RATINGS VS. AMBIENT TEMPERATURE RANGE

The PRC100 is ideal as a compensator to offset drift or negative self-generating changes in resistance as a result of an excitation of power to .25W @ +125°C. to zero power @ +125°C.

THERMAL TIME CONSTANT

The time required for our PRC100 sensor to indicate 63.2% of a new impressed temperature from a step change of 0°C. to +100°C. can be customized to your specs, as low as less than 1 second.

CONSTRUCTION DETAILS

Wire: Ni (Nickel), Co (Copper),Mn (Manganin) & Fe (Iron)

Substrate: epoxy or ceramic filled

Terminals: solderable hot-tinned copper

Protective Seal: Moisture & solvent resistant epoxy

Click here for PRC100 Tracking Chart

PRC100 Custom Series Overview

A series of varying resistor styles and sizes available, depending on the desired application. These low-cost sensors track like platinum standards but are much more versatile. They are linear tracking special-purpose temperature sensors with TCR characteristics from +3000 ppm/°C. to 4000 ppm/°C & follow the well-defined curve and linear slope of platinum.

RESISTANCE TEMPERATURE CHARACTERISTIC (Rt)

Rt is defined by IEC standard, pub. 751: alpha = 0.00385 ohm/ohm/°C.*

For range -40°C. to 0°C : RT = Ro[1+At+Bt²+C(t-100°C.) t³]

For range 0°C. to +150°C : RT = Ro(1+At+Bt²)

Constants in this equation:

A = 3.79782 x 10-³ B = 6.502 x 10-7 C= 4.3735 x 10-¹²

Rt = Ro[1+At+Bt²]

Rt = 100[1+(3.79782 x 10-³ x 100)+(6.502 x 10-7 x 100²) ]

Rt = 100[1+.379782 +.006502]

Rt = 100 x 1.386284

Rt = 138.628 ohms at 100°C.

Rt = Ro[1+At+Bt²+C(t-100) t³]

Rt = 100[1+(-.1519128)+(.00104032)+(.00003918656) ]

Rt = 100 x .8491667

Rt = 100[1+(3.79782 x 10-³ x -40)+(6.502 x 10-7 x -40²)+ (4.3735 x 10-¹²x (-40-100) x -40³) ]

Rt = 84.916 ohms at -40°C.

Fixed points are in Degree Celsius (°C.) Ro = 0°C. The other reference temperature used in the equation is +100°C however this can be replaced by any temperature desired with respect to the base temperature of 0°C. The PRC100 Std. Ref. follows a well-defined theoretical curve & linear slope from base 0°C. proving that most reference points are calculable within very close tolerances (Ratio=Rt/Ro)

*Theoretical curve & slope are based upon values of the International Practical Temperature Scale (IPTS-68 & 90).

CAN'T FIND THE PART TO MATCH YOUR SPECS?

Then let PRC custom manufacture your wire wound resistor, sensor, or shunt with some of the shortest lead times in the industry. Engineering samples can be supplied at no cost to you in 7-10 days for most jobs. Computer tracking charts are available for reference with certain part types. If you need a specific marking on your part(s) we will custom print your order with the marking you desire & at no additional cost to you. If needed, you can interchange the size, shape, lead dimension, wattage, voltage, current, Ω value, tolerance, & TCR characteristics with most part types. You can check our PRC100 Custom Series or visit our PRC100 Standard Reference Series & see if one of our other parts will satisfy all your requirements. If you still do not find a part that meets the exact specifications your application requires, simply follow the link Contact/Request For Quote & fill in all known spec fields. One of our highly trained engineers will review your objectives and see if we can modify one of our standard parts to satisfy all your requirements. If you are unsure how to accurately complete this form, give us a call & our sales department will be pleased to assist you.

ORDERING PROCEDURE

To order from our PRC100 custom series part simply contact our sales department and someone will be glad to assist you. If you need parts now you can also check our standard reference series stock Virtual Store Ultra PRC100 Std Ref Series and select the specific product you wish to purchase & the desired quantity by clicking on the arrow underneath the word quantity. This will unfold a drop down menu allowing you to select the quantity you wish to order. Once you have chosen the quantity you wish to receive, simply click the Add to Cart button shown at the bottom of the quantity selection page to receive further instructions. If you wish to order larger quantities than allowed or if the part you need is not featured in our virtual store, our sales department is available to provide price, delivery, lead time & all other pertinent ordering instructions to companies within the U.S.A. If you wish to place an order in the United States, simply give us a call & ask for the Sales Department, our contact information is at the very top of every page. For companies outside the U.S.A., we have sales representatives in over 30 countries to assist you. Click the International Sales Representative Map to locate the sales representative nearest to your region & view their contact information. Our international sales representatives are readily available & eager to answer all inquiries regarding pricing, lead time, & ordering instructions as well as any other questions you may have.