The MS Series Shunts can be customized for 50 mV and 100 mV applications. These are typical values for the 50mV shunts using the Voltage Drop Method

RESISTANCE AND TOLERANCES:

.001Ω to 100Ω in any specified value or decimal part of an Ohm to as close as ±0.005% Tolerance, see Fig. 2.

TCR CHARACTERISTICS:

to 0±10 ppm/°C.

POWER RATINGS:

All resistance values at full power are based upon ±1% resistance tolerance at 25°C. Derating is required for higher temperatures and/or closer tolerances.

PROTECTIVE ENCAPSULATION:

High temperature epoxy.

TERMINALS:

Heavy-duty commercially pure copper test leads match current rating of shunt selected. Also Four(4) low EMF copper terminals are available for very accurate current-sensing applications.

MARKING:

PRC symbol, type, resistance value, tolerance and terminals. Custom marking, if specified. e.g. MS-40A = 0.001Ω (to 40A).

PURCHASING INFORMATION:

Please specify (where they apply): Quantity, PRC type or resistance value, resistance tolerance, DC current, wattage, TCR characteristic, and temperature span of operation and terminals required.

REMEMBER:

If you are looking for an easy and inexpensive method to test for high current in automotive style charging systems, PRC's popular MS-40 Meter Shunts (which include heavy-duty test leads) are readily available for delivery within one week.

CUSTOMIZED SHUNTS:

We can also customize any of our MS shunts to your specs in any ohmic value from 0.001Ω to 100Ω with several 2 & 4 terminal designs for power or current-sensing applications. All of which are reasonably priced with quick deliveries, & yes we accept VISA & MasterCard!